中空吹塑机，吹瓶机，塑料挤出机。 **大制品容积（Max. volume）--------------------------------------------------------------8-12L ●挤出装置(Extrusion system) 螺杆直径(Screw diameter)------------------------------------------------------------------------80mm 螺杆长径比(Screw L/D)---------------------------------------------------------------------------24:1 塑化能力(HDPE)(Plasticizing capacity)-----------------------------------------100kg/h(HDPE) 机筒加热段数(Barrel heating sections)----------------------------------------------------------3 机筒加热功率(Barrel heating power)------------------------------------------------------------16kw 绞料电机功率(Driving power)--------------------------------------------------------------------30kw ●合模装置(Clamping device) 模板**大平面尺寸（宽×高）Max.dimension of platen(W×H)-----------------520×420mm 合模力(Clamping force)----------------------------------------------------------------------------110kn 移模行程(Mold-moving stroke)-------------------------------------------------------------------600mm 模板开距(Mold platen opening stroke)------------------------------------------------------200-560mm ●气源(Pneumatic system) 气源压力(Air supply pressure )--------------------------------------------------------------------0.7mpa 工作压力(Work pressure)---------------------------------------------------------------------------0.6mpa 耗用量(Air consumption)-----------------------------------------------------------------------0.8m3/min ●水源(Water supply) 水压(Water supply pressure)----------------------------------------------------------------------0.3mpa ●电源(Power supply) 电压(Voltage)-----------------------------------------------------------------------------------------AC380v 频率(Frequency)--------------------------------------------------------------------------------------50hz 线制(Wires)---------------------------------------------------------三相四线制 Three phase for wires 总额定功率(Total rated power)---------------------------------------------------------------------75kw